MyEnergy MyEnergi zappi 1.4 - 22 kW, wall box (white/grey, type 2 socket, with PIN)

Type: wall box
Colour: white/grey
EAN: 9506664599566
Manufacturer No.: ZAPPI-2H22UW-T
Purpose: For charging electric vehicles
Area of application: inside, outside
Placement: Wall Mounted, Free Standing (Optional)
Voltage: 230 — 400V
Frequency: 50Hz
Charging power: 1.4 — 22 kW
Charging mode: IEC 61851-1, mode 3
Number of phases: 3
Charging current adjustable: Yes
Charging current: 6 — 32 A
Charging point(s): 1 (1x type 2 socket)
Power consumption in standby mode: 3 watts
Interface(s): RJ-45, WLAN, Proprietary
: 868MHz
Access security: PIN
Protection mechanisms: Residual current protection [30 mA type A RCD (EN 61008) + 6 mA DC protection (EN 62955)], failure of the protective conductor (protective earth), welded contact, overcurrent protection, over/under voltage protection, temperature monitoring
Operation: Key-controlled display, myenergi app
Display/Indicator: LCD with backlight, Multi-color LED (charging/power status)
Housing material: PC/ASA (batch dependent)
IP protection class: 65
Ambient conditions: -25 — 40 °C
Installation Conditions: Circuit breaker: 32 A, Type B, 4 pole, ground wire must be properly installed and securely connected
Feature: Dynamic load management, 3 charging modes (ECO+, ECO, FAST), charging and event log, programmable timer function, economy tariff sensor input
Funding from KFW: IMPORTANT: The funding must be applied for BEFORE purchasing the charging station! Subsequent submission is unfortunately not possible! The prerequisite for the subsidy is that only electricity from renewable energies is used for the charging stations, e.g. directly from your own photovoltaic system or via an energy supplier. Detailed information on KfW funding can be found on the KfW website.
Additional information: Cable entry: rear, bottom or sides, mains current transformer max. 100 A primary current, max. cable diameter 16mm / optional 24mm
Note: A qualified electrician is required for installation, repair or maintenance! This also takes care of reporting to the local grid operator/energy supplier. When installing a charging station with a charging capacity of more than 11 kW, it is also mandatory to obtain prior approval from the network operator/energy supplier.
Accessories: Mains current sensor, CT clamps, 1x drilling template, 1x brick wall mounting kit, wireless unit mounting kit (4x 50mm Pozidriv screws, 4x wall plugs, 4x washers)
: harvi, eddi, stand
Dimensions: Width: 282mm x Height: 439mm x Depth: 122mm