Arctic GmbH ARCTIC P12 MAX High-Performance Fan, 4-pin, 120mm, Black

High-Performance Fan P12MAX, 4-pin, 120mm, black.
Features: Designed for continuous operation. The ball bearing of the Japanese manufacturer NMB ensures a particularly long service life. Compared to sleeve bearings, ball bearings produce a higher bearing noise. Therefore, the P12 Max is the perfect choice if you want to ensure permanent operation at high speeds. Maximum smoothness, minimum vibration. Due to a sinus-magnetizing, the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. The rubber pads mounted at the corners additionally dampen the residual vibrations caused by the higher revolutions. Extremely wide speed range. The P12Max extends the controllable speed to an impressively wide range from 200 rpm up to 3300 rpm. This enables a quiet operation when low airflow is needed and also an unprecedented level of performance on heatsinks and radiators. The P12 Max provides a significant performance boost to existing air and water cooling solutions. Optimised for static pressure.During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 is particularly suitable for use on heatsinks and radiators. Improved stability. The P12 Max features a closed fan-wheel design. The advantage of this fan wheel combination is pressure stability without compromise. In scenarios with high-pressure resistances and higher speeds, the force effect is distributed uniformly over the entire fan wheel and enables low-vibration rotation while maintaining high static pressure. Dynamic speed adjustment. The fan speed can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Thus, the P12 Max allows an incomparably dynamic adjustment of the speed, so that the airflow can be perfectly regulated for every case.
Specifications: Fan speed: 200-3300 RPM. Air flow: 81.04 CFM / 137.69 m3/h. Noise level: 0.6 Sone. Fan bearing: Dual Ball Bearing. Current / voltage: 0.29A / 12V DC. Connection: 4-pin connector. Cable length: 400 mm. Size: 120x120x25 mm. Weight: 184 g.
Warranty: 6 years.